IKA Mills Tube Mill control

The world’s first patented Tube Mill control is a batch mill with disposable grinding chamber. Eliminates possibility of cross-contamination and the effort of cleaning. The grinding chamber and cover are made of a transparent material so grinding tests can be observed at any time. The mill can be used for hard (Mohs hardness up to 5), dry and brittle materials. It is especially suitable for grinding seeds, such as corn and wheat. During development of the mill, particular emphasis was placed on security. The mill will only start when the hood is closed. When the grinding chamber is not inserted properly or not closed properly, the drive unit will display an error message and the drive will not start. During operation, the grinding chamber cannot be opened. The drive and the grinding chambers are secured with a labyrinth seal. No dust can escape from the chamber or penetrate the drive.

  • Clearly arranged, multilingual OLED-display
  • Timer, adjustable from 5 s to 3 min
  • USB interface for control and documentation of all the parameters
  • Interval operation available
  • Infinitely variable speed from 5000 to 25000 rpm
  • Various operating modes
  • Adjustable safety speed
  • Adjustable safety time
  • Programmable and storable test conditions
  • Error Code Display
  • Reproducible test results
  • Easy operation with touch keypad
  • Dust proof sealed housing
  • Quiet operation
  • Scope of delivery includes two grinding chambers: 1 x MT 40.10, 1 x MMT 40.1

Technical Data IKA Mills Tube Mill control

Process typebatch
Operating principlecutting/impact
Motor rating input100 W
Motor rating output80 W
Speed range5000 – 25000 rpm
Speed deviation2 ±%
Circumferential speed max.65 m/s
Useable volume max.40 ml
Feed hardness max.5 Mohs
Feed grain size max.10 mm
Power-ON time3 min
Mill feed can be cooled in milling chamber with dry iceyes
Dimensions (W x H x D)180 x 170 x 300 mm
Weight2.7 kg
Permissible ambient temperature5 – 40 °C
Permissible relative humidity80 %
Protection class according to DIN EN 60529IP 30
USB interfaceyes
Voltage220 – 240 / 100 – 120 V
Frequency50/60 Hz
Power input100 W

Produk Dry Block Heater

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “IKA Mills Tube Mill control”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

Anda mungkin juga suka…